Engine - GM (19433032)

Details

• Brand:

  

• SKU:

  19433032

• Description:

  A NEW STANDARD FOR AFFORDABLE SMALL-BLOCK PERFORMANCE!
  If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 delivers! With 357 horsepower and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 Small-Block has been the industry benchmark for decades.
  The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with four-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes drivability and airflow capability. It all adds up to a 24-horsepower gain over our 350 HO crate engine - and a great, affordable alternative to rebuilding.
  For more complete crate engines, see the SP350/357 Deluxe P/N 12677170 and the SP350/357 Turn-Key P/N 12677177.
  TECH SPECS
  Part Number: 12677167 / 19367080
  Engine Type: Chevy Small-Block V-8
  Displacement (cu in): 350
  Bore x Stroke (in): 4.000 x 3.480
  Block (P/N 10105123): Cast iron with 4-bolt main caps
  Crankshaft (P/N 10243070): Nodular Iron
  Connecting Rods (P/N 10108688): Powdered metal
  Pistons (P/N 88894280): Cast aluminum
  Camshaft Type (P/N 12677151): Hydraulic roller
  Camshaft Lift (in): 0.473" intake / 0.473" exhaust
  Camshaft Duration (@.050 in): 215° intake / 223° exhaust
  Cylinder Heads (P/N 12558060): Cast iron; as cast with 64cc chambers
  Valve Size (in): 1.940 intake / 1.500 exhaust
  Compression Ratio: 9.0:1 nominal
  Rocker Arms (P/N 10089648): Stamped steel
  Rocker Arm Ratio: 1.5:1
  Recommended Fuel: Premium pump
  Ignition Timing: 32? Total @ 4,000 rpm
  Maximum Recommended rpm: 5,600
  Balanced: External
  Flexplate : Not Included
  Intake Manifold : Not Included
  INSTALLATION NOTES

  • Use the Holley 670-cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque
  • Requires intake manifold, carburetor, distributor, spark plug wires and water pump to complete assembly
  • Requires externally balanced automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
  • Requires Externally Balanced Dampener
  • Designed for pre-1976 street vehicles or any off-road vehicle
  • Not intended for marine applications
  NOTE: Distributor with melonized steel gear MUST be used with long-blocks and Partial engines with steel camshafts, or engine damage will occur.

• Replaces:

  19367080, 19420881, 19431612

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov